Flexline Above Ground Metal Garden Edging (240mm, 400mm, 560mm heights) – Galvanised Finish
The StraightCurve Flexline is an above-ground garden metal edging system designed for raised garden beds, retaining walls, or multi-level gardens. The Flexline range is a modern garden edging system that helps create flowing, organic curves in your garden layouts. It is designed with DIY in mind and is suitable for mounting with both soft and hard surfaces.
Flexline garden edging also connects with the StraightCurve Rigidline range of steel garden edge products to add strong geometric lines to the beautiful sweeping curves of your garden beds. Get creative with your garden design and landscaping projects.
The primary component of the above-ground Flexline curved garden edging system is a 2160mm steel plate edge set, available in a variety of height options. Each edge set includes a Joining Set (containing wedges, sliders, and a joint bracket), 5 x galvanised spikes, and 2 x attached bracing ribs.
StraightCurve Flexline edging offers:
- 2160mm length.
- Available in 240mm, 400mm, and 560mm heights.
- 2.0mm plate thickness.
- 8.0mm top thickness.
- 2 x attached bracing ribs per length.
- Galvanised finish.
- Galvanised finish product includes a 15-year warranty.
- Additional Accessories.
Flexline edging is also available in a weathered finish.
The following are available accessories for the StraightCurve Flexline range.
Anchor posts are intended for driving into the ground adjacent to edge plate bracing ribs. The bracing ribs are then screwed into the anchor posts (using the included Tek screws) to support the edge. It is recommended to use at least 2 x anchor posts per edge piece unless being looped into a circle. The 240mm height edges use a small anchor post; the 400mm and 560mm edges use a large anchor post.
Rigidline corner pieces are pre-scored so that they may be bent to the desired corner angle. Corner pieces include a standard joining set.
The Universal Bracing Set is used to provide additional support for edges and consists of a stake, chain, and turnbuckle. The bracing set can also be used should there be a need to secure the edging to a hard surface. Simply remove the stake and bolt to the surface (hard surface mounting bolts available as an additional accessory – please make note on enquiry checkout).